The 9ft Concrete End Fence Post is made for finishing a run neatly and securely, whether you’re stopping at a wall, gate opening, or the end of a boundary line. Our concrete posts are wet cast and steel reinforced, then vibration finished to give three smooth sides out of four. They’re finished with a decorative pyramid top for a clean look above the fence line.
End posts are designed to take a panel on one side only, giving you a clean termination without unused slots showing. Our end posts are sized at 100 x 125mm, which gives extra depth compared with intermediates and helps the post feel more substantial at the end of a run. They’re a good choice where the fence line is exposed, or where you want the end of the boundary to stay firm and tidy over time.
Many builds use a gravel board at the base to support the run and lift timber clear of damp ground. If you’re building with concrete gravel boards, they help keep the base line straight and reduce the risk of panels settling down. You can browse concrete gravel boards or the wider gravel boards range to plan the full setup.
When choosing length, allow for the height of the fence plus a sensible depth into the ground. For taller fences and exposed sites, deeper footings usually pay off. Set your end posts first, run a string line, and then work back with intermediate posts to keep everything straight. For the full range of post types, see concrete fence posts.
Colour: Light Grey, Depth: 100MM, Length: 9FT (2.7M), Type: Concrete End Fence Post, Width: 125MM
