Choosing The Right Double Slatted Fence Panels
Double slatted fence panels provide a clean, contemporary boundary for modern gardens, patios, seating areas and landscaped outdoor spaces.
The horizontal timber slats create a structured appearance while providing more screening than standard open slatted fencing. Small spaces between the boards allow some light and airflow through, helping the boundary feel less heavy than a fully solid panel.
East Coast Fencing supplies framed, pressure treated double slatted panels in a standard width of approximately 6ft. The range includes 3ft, 4ft, 5ft and 6ft height options for low garden divisions, mid-height screening and full-height privacy fencing.
Double slatted designs are available within our wider fence panels range. The correct height will depend on the required screening, the size of the garden and whether the panels will be installed above gravel boards.
Contemporary Horizontal Fence Panels
The defining feature of double slatted fencing is its straight horizontal board layout.
The repeated lines create a clean and ordered appearance that works particularly well alongside modern homes, garden rooms, rendered walls, paving and structured planting.
Unlike traditional closeboard or waney lap fencing, double slatted panels are chosen as much for their appearance as for their practical boundary function.
The framed construction provides a neat finished edge around the panel and helps the horizontal lines remain consistent across each fence bay.
Correct installation is important because uneven posts or panels can make the repeated horizontal pattern appear misaligned.
How Double Slatted Fence Panels Work
Double slatted fence panels use horizontal timber slats arranged to provide screening across the panel.
The boards are positioned so that views through the boundary are reduced while narrow spaces still permit some light and airflow.
The construction creates visual depth and provides a more finished appearance when the boundary is viewed from either side.
The slats are held within a surrounding frame, allowing the complete panel to be installed between suitable fence posts.
Exact slat spacing and construction details should be checked on the individual product page when comparing decorative panel options.
Double Slatted Panels For Garden Privacy
Double slatted panels provide useful screening without creating the completely solid face of closeboard or waney lap fencing.
The close horizontal arrangement reduces direct views through the boundary from normal garden angles.
They are particularly suitable around patios, outdoor dining areas and seating spaces where customers want privacy combined with a modern decorative finish.
The panels are not completely opaque. Light, movement and limited views may remain visible through the slat gaps from certain positions.
Where maximum privacy is the only priority, a fully solid closeboard panel may provide stronger screening.
Double Slatted Fence Panels For Patios
Double slatted panels are well suited to patios because their clean design can form part of the wider landscaping scheme.
The horizontal lines create a tidy backdrop behind furniture, containers and outdoor cooking areas.
The slatted construction can provide greater privacy while retaining some airflow around the seating space.
When calculating the required height, measure from the finished patio surface rather than from any lower ground level beside the boundary.
Consider the panel appearance from inside the home as well as from the patio, particularly where the fence is visible through large windows or doors.
Double Slatted Panels For Seating Areas
A double slatted screen can help create a more defined and private garden seating area.
The contemporary design works well with outdoor sofas, dining furniture, pergolas and modern planting arrangements.
Panels can be installed across a complete boundary or used selectively around the most visible part of the seating space.
Using them as feature sections can introduce a modern finish while allowing more economical panel styles to be used elsewhere.
The supporting posts and gravel boards should be coordinated with the panel colour and overall garden design.
Double Slatted Panels For Garden Rooms
Horizontal slatted fencing works naturally alongside garden rooms, offices and modern timber buildings.
The repeated lines can complement horizontal cladding and create a coordinated transition between the building and garden boundary.
Panels may be used to screen storage areas, service zones or views behind the structure.
Leave sufficient access around the garden room for maintenance and ensure the fence does not obstruct ventilation, doors or windows.
The distance between the panel and building should also allow the timber to dry properly after wet weather.
Double Slatted Panels For Garden Zoning
Double slatted panels can divide larger gardens into separate functional areas.
They may be used to distinguish patios from lawns, screen bins or utilities, define an outdoor dining area or create a backdrop around a garden office.
Lower panels provide visual structure without completely separating the spaces.
Taller panels create stronger screening and a greater sense of enclosure.
Using a consistent horizontal style across several areas can help the overall garden design feel connected.
Double Slatted Fence Panel Heights
Double slatted panels are available in several popular heights for decorative garden divisions, moderate screening and full-height boundaries.
6ft Double Slatted Fence Panels
6ft double slatted fence panels provide the greatest level of screening within the range.
They are suited to rear garden boundaries, patios and seating areas where privacy is an important consideration.
A gravel board installed below the panel will increase the completed fence beyond the nominal 6ft panel height.
5ft Double Slatted Fence Panels
5ft double slatted fence panels provide substantial screening while creating a slightly lower fence line.
This can be useful in smaller gardens or around patios where a full-height panel would feel too dominant.
4ft Double Slatted Fence Panels
4ft double slatted fence panels form a mid-height decorative boundary.
They are suitable for garden zoning, raised patios and areas where moderate screening is required.
3ft Double Slatted Fence Panels
3ft double slatted fence panels create a low modern boundary around paths, patios and internal garden divisions.
They introduce the horizontal design without significantly blocking views across the outdoor space.
Standard Double Slatted Panel Widths
Double slatted panels are supplied in a standard width of approximately 6ft, or around 1.83m.
This makes them suitable for common UK fence bays using appropriately spaced timber or concrete posts.
Before replacing an existing panel, measure the clear opening at both the top and bottom of the bay.
Older posts may have leaned or moved, resulting in a gap that differs from the original nominal width.
Check exact product dimensions where the panel must fit an existing concrete post system or a tightly restricted space.
Framed Double Slatted Fence Panels
The surrounding timber frame gives double slatted panels a neat, defined edge.
This helps the panel maintain its shape and makes the finished boundary appear more structured.
The frame also provides the main handling and fixing points during installation.
Panels should be lifted using the frame rather than individual slats, which are not intended to carry the full panel weight.
When several panels are installed in a row, careful alignment of the frames and horizontal boards is important for achieving a consistent appearance.
Pressure Treated Double Slatted Panels
Double slatted fence panels are pressure treated for outdoor use.
The preservative treatment helps protect the timber against rot and fungal decay and provides deeper protection than a surface coating alone.
The panels do not require immediate preservative treatment before installation.
Pressure treatment does not remove the need for secure fitting or sensible maintenance. Keeping the lower frame away from wet soil and trapped debris can help the timber dry after rain.
The appearance of the timber will gradually change as it is exposed to sunlight and weather.
Natural Timber Appearance
Timber is a natural material, so differences in grain, knots and shade should be expected across double slatted panels.
Individual slats may absorb treatment differently, producing minor variations in colour when the panel is new.
These differences normally become less noticeable as the timber weathers.
Small natural changes do not necessarily indicate a defect, although any significant structural damage should be assessed before installation.
A compatible exterior timber finish may be applied later where a different colour or refreshed appearance is required.
Double Slatted Or Hit And Miss Fence Panels
Double slatted and hit and miss fence panels both use horizontal timber boards, but they provide different levels of screening and airflow.
Double slatted panels use a closer arrangement and generally provide stronger privacy.
Hit and miss panels have alternating boards on opposite sides, allowing more air and light to move through the boundary.
Double slatted fencing has a crisp, refined appearance suited to contemporary patios and landscaped gardens.
Hit and miss fencing creates a more open layered effect and can be particularly useful in exposed locations.
Double Slatted Or Omega Lattice Panels
Omega lattice fence panels combine a solid lower body with a curved open trellis top.
They provide a softer decorative style that works naturally with traditional planting and climbing plants.
Double slatted panels have straight horizontal lines across the complete panel and create a more consistent contemporary appearance.
Choose Omega lattice where a curved feature and lighter top section are preferred. Choose double slatted fencing where modern structure and screening across the full panel are more important.
Double Slatted Or Closeboard Fence Panels
Closeboard panels provide a fully solid face using overlapping vertical boards.
They are generally selected where strong privacy and a substantial traditional construction are the main requirements.
Double slatted panels provide a more decorative modern appearance and allow some light and airflow through the boundary.
Closeboard may be better suited to practical full-boundary fencing, while double slatted designs work particularly well in visible landscaped areas.
Double Slatted Panels In Smaller Gardens
The horizontal lines of double slatted fencing can help create a sense of width in smaller gardens.
The limited spaces between the boards also allow more visual depth than a completely solid panel.
However, the tallest panels may still make a narrow garden feel enclosed.
Consider whether a 4ft or 5ft panel would provide enough screening before choosing a full 6ft boundary.
The panel colour, gravel board and post material will also affect how visually dominant the fence appears.
Double Slatted Panels In Windy Gardens
The gaps between the slats allow some airflow, but double slatted fencing still presents a significant surface to the wind.
It should not be assumed to be suitable for an exposed boundary without an appropriately designed supporting structure.
Tall panels require securely installed posts and suitable foundations.
Long, uninterrupted fence runs and corner positions may experience greater wind pressure.
For a more open construction, hit and miss panels may allow additional airflow, although they also require secure installation.
Using Double Slatted Panels With Wooden Posts
Double slatted panels can be installed with wooden fence posts to maintain a coordinated timber appearance.
The posts provide suitable fixing points for exterior clips, brackets or screws.
Post section and length should be chosen according to the panel height, fence exposure and ground conditions.
Accurate alignment is especially important because the straight horizontal lines make uneven panels highly visible.
Check each panel level before tightening the final fixings.
Using Double Slatted Panels With Concrete Posts
Double slatted panels may be installed between compatible slotted concrete fence posts.
Concrete posts provide a rigid framework and do not rot at ground level.
Check the exact panel width and frame thickness against the post slots before ordering.
The decorative frame should be lowered carefully into position without placing pressure on individual slats.
The contrast between concrete posts and contemporary timber panels should also be considered as part of the finished garden design.
Using Gravel Boards With Double Slatted Panels
Gravel boards can raise the lower frame away from soil, rain splash and garden debris.
This is particularly useful where the fence runs beside lawns, planting beds or changes in ground level.
Concrete gravel boards work with suitable slotted concrete posts, while wooden gravel boards retain an all-timber appearance.
The gravel board increases the total finished fence height. Panel height, gravel board height and post length should therefore be selected together.
Replacing Double Slatted Fence Panels
A damaged double slatted panel may be replaced individually if the existing posts remain secure and the same design is available.
Measure the width, height and frame thickness before ordering.
Compare the slat spacing and frame design because apparently similar panels may not align when installed together.
New timber may initially appear different from older weathered panels.
If an exact replacement is unavailable, renewing several adjoining panels may provide a more consistent appearance.
Measuring For Double Slatted Fence Panels
Measure the clear opening between the posts at both the top and bottom.
Confirm the required panel height from the top of any gravel board.
Check every bay in an existing fence because small variations can affect alignment across the horizontal slats.
Include the gravel board when calculating the completed fence height.
Check exact product dimensions before ordering, particularly where the panel will be fitted into an existing concrete post system.
Installing Double Slatted Fence Panels
Double slatted panels should be supported and lifted using the outer frame.
Do not carry the full panel using individual slats.
Position the panel level and check that its horizontal lines align with neighbouring sections before securing it.
Use exterior clips, brackets or screws suitable for the post material and panel weight.
When installing into slotted posts, lower the panel evenly to avoid damaging the frame.
Caring For Double Slatted Fence Panels
Pressure treated double slatted panels require limited routine maintenance.
Keep soil, leaves and dense planting away from the lower frame.
Check slats and fixings after strong winds or accidental impacts.
Remove debris that becomes trapped between boards so that the timber can dry properly.
Manage climbing plants carefully because heavy growth can obscure the slatted design and place additional weight on the panel.
A compatible exterior coating can be applied later if you want to refresh or alter the timber colour.
Buy Double Slatted Fence Panels From East Coast Fencing
East Coast Fencing supplies framed, pressure treated double slatted fence panels for patios, seating areas, contemporary boundaries and modern garden projects.
The range includes standard 6ft-wide panels in 3ft, 4ft, 5ft and 6ft heights.
Whether you need one decorative feature panel or double slatted fencing for a complete boundary, compare the available heights and specifications above.
East Coast Fencing is backed by more than 20,000 customer reviews across Trustpilot and Google.
