The 6FT x 6FT Framed Contemporary Double Slatted Panel is the full-height version of this modern decorative range. It measures 1800mm high, 1.828m wide and 45mm deep, making it suitable for rear and side boundaries where a tall screen is required but a completely solid fence is not the preferred look.
Manufactured in Poland and imported by East Coast Fencing, the panel is intentionally produced at a true UK 6ft width of 1.828m. This is wider than the 1.8m format used for many imported decorative panels. For customers replacing a traditional UK panel or combining decorative sections with conventional 6ft-wide fencing, that difference can avoid the unwanted gaps or packing that arise when a 1.8m panel is used in a 6ft bay. Measure existing post openings before purchase because installed bay sizes are not always exact.
The panel has a 45 x 45mm frame with semi-planed timber and horizontal 8 x 45mm battens on both faces. Approximately 40mm gaps remain between battens, so even at 1800mm high this is not a solid privacy panel. The double-sided slatted arrangement creates substantial visual screening while still letting some light and air pass through the boundary.
The timber is pressure treated green/natural. Full-height decorative panels need careful support and alignment during installation: set the fence posts accurately, keep the horizontal battens level across adjoining bays and avoid forcing a panel into an undersized opening. The timber should also be kept clear of direct soil contact. Where the fencing system permits, a gravel board can form a separate base below the panel.
Choose this 1800mm size where height is a key part of the screening requirement but you still want the open character of double slatting. Shorter options are available in double slatted fence panels; other full-height styles can be compared within decorative fence panels.
