The 8ft (2.4m) concrete end fence post is designed to finish the final bay of a fence run. Its 100 x 125mm profile has a single panel slot, leaving the outer face closed instead of showing an unused second slot at the boundary end.
At a stepped boundary, the end post also determines the visual finish of the last bay. Check the intended top height and ground level together before fixing it permanently.
The 2.4m post combines wet-cast concrete and internal steel reinforcement. After casting it is vibration finished for three smooth sides out of four, with a pyramid profile at the top. Concrete remains unaffected by timber-style ground-line rot, which makes it a practical material for a post intended to stay fixed in the ground. The 100 x 125mm section gives the end post additional depth while keeping a narrower face than the 125 x 125mm corner and 3-way profiles. The single-slot arrangement is specifically for a true termination point, such as the end of a boundary beside a drive, wall, gate opening or open garden edge. Use compatible fence panels within the run.
Measure the total run before setting the end post so the final bay lands cleanly at the intended termination point. Keep the single slot facing the last panel and check the visible outside face while the post is still adjustable. The fence post length calculator is useful for size selection, and the chosen cement product should be installed to its stated instructions. Because the post is 2.4m long, plan handling and temporary bracing before installation, especially where access to the hole is restricted by an existing fence or planting.
At 8ft (2.4m), this end post gives substantial scope for a taller final bay and a secure below-ground section. It is useful where the termination point needs more overall post than the shorter sizes, while still avoiding the additional weight and length of the 9ft version where that is unnecessary. Use an end post where the fencing genuinely stops. If another fence line continues away from that point, a corner or 3-way post will usually provide the correct slot arrangement instead.
For a complete slotted system, match this 8ft component with the correct profiles from the concrete fence posts range. Check every corner, end and junction on the plan before ordering so the 2.4m posts arrive in the right slot configurations.
