Measuring 1.83m x 0.45m, the 1.83M x 0.45M Traditional Square Trellis Panel - Pressure Treated Green/Natural uses the familiar open square pattern associated with traditional garden trellis. The approximate 100mm openings give climbing plants a practical framework while allowing considerably more light and visibility through the panel than a close privacy lattice.
At 450mm high, it provides more planting area and visual detail than the 300mm version while remaining compact enough for topping fencing, edging raised structures or adding an open section above a low boundary. This panel is manufactured by East Coast Fencing from 16 x 38mm rough sawn trellis batten and pressure treated for outdoor use. We deliberately use a fencing-grade rough sawn finish, so buyers should expect natural timber texture rather than smooth planed joinery.
The 450mm height provides a middle ground between a narrow decorative topper and a deeper 600mm panel. It is particularly useful where the trellis needs enough depth to look intentional from both sides of the boundary but should not dominate the fence below. Consider the mature height of the plants as well as the timber size when deciding whether this is sufficient.
The green/natural treatment protects the timber for outdoor use while leaving its underlying grain and character easy to see. Freshly treated sections can vary in shade and will change naturally after installation as the panel is exposed to weather.
As a fence topper, it is best fixed to the posts or a suitable supporting frame rather than just the thin top edge of a fence panel. Measure the span before installation and use fixings intended for exterior treated timber. The fence topper trellis category shows other low-height options if you are deciding how much extra height to add.
Choose this traditional pattern when plant support and an open garden feel are the priority. For closer screening, look at privacy square trellis; for other open styles and dimensions, browse all trellis panels.
