Measuring 1.83m x 0.3m, the 1.83M x 0.3M Traditional Square Trellis Panel - Pressure Treated Green/Natural uses the familiar open square pattern associated with traditional garden trellis. The approximate 100mm openings give climbing plants a practical framework while allowing considerably more light and visibility through the panel than a close privacy lattice.
Its 300mm height is deliberately modest, making it useful where you want to break up the solid top line of a fence or give light climbers a small amount of extra support without creating a tall screen. This panel is manufactured by East Coast Fencing from 16 x 38mm rough sawn trellis batten and pressure treated for outdoor use. We deliberately use a fencing-grade rough sawn finish, so buyers should expect natural timber texture rather than smooth planed joinery.
Choose the 300mm size when the goal is a light finishing detail rather than extra screening. Its shallow depth is useful above fences where you want climbers to trail along the top line or want to soften a solid panel without materially changing how open the boundary feels. If the fence needs a more obvious planted section, the 450mm or 600mm sizes provide more usable lattice area.
The green/natural treatment protects the timber for outdoor use while leaving its underlying grain and character easy to see. Freshly treated sections can vary in shade and will change naturally after installation as the panel is exposed to weather.
As a fence topper, it is best fixed to the posts or a suitable supporting frame rather than just the thin top edge of a fence panel. Measure the span before installation and use fixings intended for exterior treated timber. The fence topper trellis category shows other low-height options if you are deciding how much extra height to add.
Choose this traditional pattern when plant support and an open garden feel are the priority. For closer screening, look at privacy square trellis; for other open styles and dimensions, browse all trellis panels.
