The 6FT x 3FT Omega Lattice Decorative Fence Panel combines a low hit & miss screen with a curved lattice top. The overall height is 900mm at the centre of the Omega curve, while the shoulders at each side are approximately 700mm high. This makes it primarily a decorative low-boundary panel rather than a privacy fence.
The panel is manufactured in Poland and imported by East Coast Fencing. It measures a true 6ft (1.828m) wide, matching the traditional UK panel format. Many imported decorative panels are only 1.8m wide, so this UK-spec width is useful when replacing a conventional 6ft panel or setting out a new fence around standard-width bays. Always measure existing openings because actual post spacing can vary.
A 45 x 45mm semi-planed timber frame gives the panel an overall depth of 45mm. The lower section uses 100 x 5mm grooved horizontal slats arranged in a hit & miss pattern on opposite faces, helping interrupt direct sight lines while retaining some airflow. Above this is an integrated curved diamond-lattice section approximately 300mm deep, which forms the distinctive Omega profile rather than being a separate trellis fixed on afterwards.
The green/natural timber is pressure treated. When planning the finished level, use the centre and shoulder dimensions rather than treating the top as a straight 900mm line. The curved profile matters if the fence runs beneath a window, branch or other fixed feature. Keep the base of the timber clear of soil and check the actual opening between fence posts before installation. A suitable gravel board can be used if a separate base is required.
Choose this 900mm Omega where a low decorative boundary and curved top are more important than privacy. Taller versions with the same design are available in Omega lattice fence panels; other panel styles can be compared under decorative fence panels.
