The 6FT x 6FT Decorative Diamond Lattice Trellis is a full-height decorative lattice panel, measuring approximately 1.83m wide by 1.8m high. Its diagonal lattice creates the diamond pattern that distinguishes this range from our square and horizontal trellis styles, making it useful where the trellis itself is intended to contribute to the appearance of the boundary.
At roughly 1.8m high, this is the largest diamond lattice size in the range and is suited to full-height climbing support or open screening where a solid fence would be too enclosed. The timber is pressure treated in a green/natural finish for outdoor use. Natural variation in grain, knots and treatment colour should be expected, and the appearance will change gradually as the timber weathers.
The 6ft diamond lattice is a full-height decorative screen and should be planned accordingly. It offers the largest climbing area in this range and can create a strong garden division once planted. Before installation, consider the final weight and wind resistance of mature foliage as well as the bare trellis, and use posts or framing capable of supporting the completed planted screen.
The open diamond pattern can provide a framework for climbing plants, but it is not a solid privacy screen. Where privacy is the main objective, compare the closer openings in our privacy square trellis range. For decorative planting, allow stems room to be trained through the lattice and use ties where the plant does not attach by itself.
For taller screening or freestanding use, provide suitable posts or framing and support the panel edges properly. Set out multiple bays before fixing so the diamond pattern and panel tops remain visually consistent along the run.
This diamond lattice range is supplied by East Coast Fencing but is not one of the trellis lines we manufacture ourselves. Browse all available sizes under diamond trellis, or compare the wider selection of trellis panels if you want a different opening pattern or screening level.
