The 6FT x 4FT Decorative Diamond Lattice Trellis is a medium-height decorative trellis, measuring approximately 1.83m wide by 1.2m high. Its diagonal lattice creates the diamond pattern that distinguishes this range from our square and horizontal trellis styles, making it useful where the trellis itself is intended to contribute to the appearance of the boundary.
At 1.2m high it provides a substantial climbing area and can form an open garden divider when correctly supported. It allows light and visibility through rather than behaving like a solid panel. The timber is pressure treated in a green/natural finish for outdoor use. Natural variation in grain, knots and treatment colour should be expected, and the appearance will change gradually as the timber weathers.
The 4ft panel provides enough height to create a substantial planted screen while remaining more open than solid fencing. It can be effective where a wall or boundary needs softening with climbers, or where two areas of the garden need separating without cutting off light. Provide proper supports at the panel edges and do not treat the lattice itself as a structural post system.
The open diamond pattern can provide a framework for climbing plants, but it is not a solid privacy screen. Where privacy is the main objective, compare the closer openings in our privacy square trellis range. For decorative planting, allow stems room to be trained through the lattice and use ties where the plant does not attach by itself.
For taller screening or freestanding use, provide suitable posts or framing and support the panel edges properly. Set out multiple bays before fixing so the diamond pattern and panel tops remain visually consistent along the run.
This diamond lattice range is supplied by East Coast Fencing but is not one of the trellis lines we manufacture ourselves. Browse all available sizes under diamond trellis, or compare the wider selection of trellis panels if you want a different opening pattern or screening level.
