The 6FT x 3FT Round Top Picket Fence Panel - Pressure Treated Brown combines a 900mm boundary height with the softer outline of rounded picket pales. At 1830mm wide, it is intended for standard panel-style garden runs where an open fence is preferred to solid screening. The 3ft height gives a clearer sense of separation than the 2ft version, making it suitable for front gardens, side paths and internal garden divisions while still allowing views through the boundary.
East Coast Fencing manufactures the panel using 13 timber picket pales, each 75mm wide, fixed to two 75 x 32mm backrails. The pales are spaced approximately 70mm apart. That spacing is a defining feature rather than an omission: the panel is designed to remain open, so it should not be selected where privacy or a closed visual screen is required. The timber is pressure treated and this version is supplied in brown.
A neat 900mm-high run depends on consistent setting out. Measure the 1830mm panel itself before finalising post centres, keep posts upright and maintain a small gap between the pale ends and damp ground. An all-timber structure can be built with suitable wooden fence posts; the broader fence posts range can be used when comparing other supporting options. Where the ground falls away, decide where each step will occur before fixing the posts so the top line remains intentional.
The round-top profile is the key stylistic difference from the pointed version, giving the same open construction a less angular finish. Other picket heights and top styles are available within picket fence panels. For a gate within the same type of boundary, see the available picket gates and plan the opening before completing the panel layout.
