The 6FT x 3FT Decorative Diamond Lattice Trellis is a half-height decorative lattice panel, measuring approximately 1.83m wide by 0.9m high. Its diagonal lattice creates the diamond pattern that distinguishes this range from our square and horizontal trellis styles, making it useful where the trellis itself is intended to contribute to the appearance of the boundary.
The 900mm height can be used for partial screening, planting support and garden zoning as well as taller fence-top applications. The diamond pattern remains open, so it should not be chosen where close privacy is required. The timber is pressure treated in a green/natural finish for outdoor use. Natural variation in grain, knots and treatment colour should be expected, and the appearance will change gradually as the timber weathers.
At 3ft high, this lattice can function as a partial screen or open garden divider instead of only a topper. It is useful where a broad climbing surface is wanted at roughly half-fence height. The diamond apertures preserve an open feel, so choose it for plant support and visual definition rather than immediate privacy.
The open diamond pattern can provide a framework for climbing plants, but it is not a solid privacy screen. Where privacy is the main objective, compare the closer openings in our privacy square trellis range. For decorative planting, allow stems room to be trained through the lattice and use ties where the plant does not attach by itself.
For taller screening or freestanding use, provide suitable posts or framing and support the panel edges properly. Set out multiple bays before fixing so the diamond pattern and panel tops remain visually consistent along the run.
This diamond lattice range is supplied by East Coast Fencing but is not one of the trellis lines we manufacture ourselves. Browse all available sizes under diamond trellis, or compare the wider selection of trellis panels if you want a different opening pattern or screening level.
