Measuring 1.83m x 1.2m, the 1.83M x 1.2M Traditional Square Trellis Panel - Pressure Treated Green/Natural uses the familiar open square pattern associated with traditional garden trellis. The approximate 100mm openings give climbing plants a practical framework while allowing considerably more light and visibility through the panel than a close privacy lattice.
At 1.2m high, the panel provides a broad framework for plants and can be used where a more substantial open boundary is wanted. It offers definition and support but the approximate 100mm squares mean it should not be chosen for close privacy screening. This panel is manufactured by East Coast Fencing from 16 x 38mm rough sawn trellis batten and pressure treated for outdoor use. We deliberately use a fencing-grade rough sawn finish, so buyers should expect natural timber texture rather than smooth planed joinery.
A 1.2m traditional trellis gives enough height for many climbing plants to spread before they reach surrounding structures. It also works as an open garden divider where a full fence would create too much enclosure. If privacy is likely to become important later, decide that now: swapping to a closer lattice after plants are established is far more disruptive than choosing the right pattern at the outset.
The green/natural treatment protects the timber for outdoor use while leaving its underlying grain and character easy to see. Freshly treated sections can vary in shade and will change naturally after installation as the panel is exposed to weather.
For a taller installation, use adequate posts or framing and keep the panel edges supported. The open lattice will pass more wind than a solid panel, but a large trellis still presents a significant exposed area once climbing plants become established, so the supporting structure matters.
Choose this traditional pattern when plant support and an open garden feel are the priority. For closer screening, look at privacy square trellis; for other open styles and dimensions, browse all trellis panels.
