The 1.83M x 0.45M Privacy Square Trellis - Pressure Treated Brown is a deeper fence-top section with closer screening. Measuring 1.83m wide by 0.45m high, it uses an approximately 50mm square lattice, so the openings are noticeably tighter than our traditional square trellis. That closer pattern is the main reason to choose privacy square trellis when you want more screening without replacing the boundary with a solid panel.
East Coast Fencing manufactures this panel from pressure-treated 16 x 38mm rough sawn trellis batten. The rough sawn finish is intentional: it gives the trellis a practical fencing-timber character rather than the smooth surface of planed decorative joinery. The extra 150mm compared with the 300mm version gives climbing stems more timber to spread across and creates a more noticeable screening strip above the fence. It suits boundaries where a very shallow topper feels insufficient but a 600mm panel would be more height than required.
A 450mm panel is a useful compromise where 300mm feels too shallow but a 600mm topper would add more height than the setting needs. That extra depth matters most where the trellis will be seen from a seating area or where a climber needs more support than a narrow finishing strip can provide. Check the permitted and desired finished fence height before ordering rather than treating topper height as an afterthought.
The brown pressure treatment gives the timber a darker, warmer appearance that sits naturally alongside brown-treated fencing. Pressure treatment is applied for exterior use and improves the timber’s resistance to decay compared with untreated wood; the colour will still weather and vary naturally outdoors.
This size belongs to our privacy square trellis range. When fitting it above existing fencing, measure the actual span and confirm that the posts or framing can support the additional trellis before fixing. Keep the panel evenly supported rather than relying on a small number of fixing points, and use exterior-grade fixings appropriate for treated timber.
If the main purpose is simply to add height above a boundary, compare this denser pattern with the wider openings available in our fence topper trellis range. For customers who need complete visual privacy rather than filtered screening, a suitable product from the fence panels range may be more appropriate.
