At 1.83m x 0.9m, the 1.83M x 0.9M Slatted Trellis - Pressure Treated Green/Natural provides a half-height horizontal slatted screen with a horizontal rather than square-lattice appearance. That makes it particularly useful where a straight, contemporary-looking timber line is preferred but the boundary still needs to allow light and air through.
At 900mm high, this panel is large enough for garden zoning, partial screening and planting support rather than simply topping a fence. The open slatted construction keeps it visually lighter than a solid timber panel. We manufacture this panel at East Coast Fencing from pressure-treated rough sawn trellis timber. The rough sawn surface is a practical part of the product and will show normal timber characteristics such as knots, grain changes and saw texture.
A 900mm slatted panel is substantial enough to use as an open screen in its own right. It can define a patio edge, separate planting areas or add a contemporary upper section to lower fencing. The horizontal gaps mean it filters a view rather than blocking it, and climbing plants can increase the amount of cover over time if more screening is wanted.
The green/natural treatment protects the timber for outdoor use while leaving its underlying grain and character easy to see. Freshly treated sections can vary in shade and will change naturally after installation as the panel is exposed to weather.
If several panels are being used as a screen, set out the support positions first so adjoining edges are properly fixed. Keep the horizontal lines level from bay to bay, as small differences become more obvious across a longer run.
This style is best chosen for its linear layout and filtered screening rather than close privacy. Compare the complete horizontal slatted trellis range for other heights, or browse all trellis panels for square, privacy and decorative alternatives.
