Buy 1.8M x 75 x 75mm Wooden Fence Post - Pressure Treated Green at East Coast Fencing
1.8M x 75 x 75mm Wooden Fence Post - Pressure Treated Green is a reliable square timber post designed to support light to medium-duty garden fencing, trellis and small gates. The 75 x 75mm profile balances strength with easy handling, while the 1.8m length suits typical residential fence heights when installed at an appropriate depth.
Green pressure treatment for durability
The post is pressure treated with a green preservative that penetrates deep into the timber to help resist rot, fungal decay and insect attack. This treatment equips the post for year-round outdoor exposure and reduces maintenance requirements versus untreated wood. Over time, the green tone weathers to a softer, natural shade without affecting protective performance.
Balanced 75 x 75mm profile
The square section offers dependable rigidity for most garden applications yet remains lighter than heavier posts for easier lifting and positioning. Flat faces aid accurate alignment and provide a straightforward fixing surface for panel clips, rails and brackets—useful for keeping long runs straight and tidy.
Versatile 1.8m length
At 1.8m, the post is a practical choice for common boundary heights. When set at an appropriate depth in concrete, it supports many panel styles and lighter closeboard arrangements, including builds that incorporate a gravel board and capping for a neat, long-lasting finish.
Typical applications
- Panel fencing: Support for light to medium-duty timber panels in gardens and side returns.
- Picket & decorative fencing: Form attractive boundaries with consistent post spacing.
- Trellis & screening: Fix trellis panels, privacy screens or climber supports.
- Small pedestrian gates: Use as a gate post where a 75mm section is appropriate.
Installation guidance
- Set posts plumb and to line using a level and string line for straight, consistent runs.
- Embed in concrete; as a general guide, aim for roughly one-third of the post length below ground (adjust to suit site and load).
- On sloping ground, step posts consistently or maintain a level datum for panels and capping.
- Treat any freshly cut ends, notches or drilled holes with a suitable end-grain preservative.
Fixing and compatibility
The square faces make it simple to fit panel clips, rail brackets, trellis fixings and appropriately sized gate hardware. The post works with timber or concrete gravel boards, capping rails and post caps to complete a cohesive boundary line.
Low-maintenance performance
Ongoing care is minimal: periodically check fixings, keep soil or mulch from building up around the base, and clear debris after severe weather. If you wish to adjust colour later, allow the timber to season before applying a compatible exterior wood finish; always re-treat any new cuts beforehand.
Benefits at a glance
- Green pressure-treated timber resists rot, decay and insect damage.
- 75 x 75mm section balances strength with easier handling.
- 1.8m length suits typical residential fence heights.
- Square faces simplify alignment and fixing of panels, rails and trellis.
- Natural green finish coordinates with treated panels, rails and sleepers.
Summary
The 1.8M x 75 x 75mm Wooden Fence Post - Pressure Treated Green provides a sturdy, practical foundation for garden fencing and small gates. Its protective green treatment, manageable section and straightforward installation make it a dependable choice for neat, durable residential boundaries.
