Buy 1.8M x 75 x 75mm Wooden Fence Post - Pressure Treated Brown at East Coast Fencing
1.8M x 75 x 75mm Wooden Fence Post - Pressure Treated Brown is a dependable square timber post designed to support a wide range of light to medium-duty fencing. The 75 x 75mm section offers balanced strength and ease of handling, while the 1.8m length suits common residential fence heights when installed at an appropriate depth.
Brown pressure treatment for durability
The post is pressure treated with a brown preservative that penetrates deeply into the timber to protect against rot, fungal decay and insect attack. This long-lasting treatment equips the post for year-round outdoor exposure and reduces maintenance compared with untreated wood. Over time, the rich brown tone mellows naturally without affecting protective performance.
Balanced 75 x 75mm profile
The 75 x 75mm square section provides reliable rigidity for typical garden applications while remaining lighter and easier to handle than heavier posts. Flat faces help with accurate alignment and provide a straightforward fixing surface for panel clips, rails and brackets, making neat, straight runs simpler to achieve.
Versatile 1.8m length
At 1.8m, the post is suited to standard residential fence builds. When set at an appropriate depth in concrete, it supports many panel styles and lighter closeboard arrangements, including configurations that incorporate a gravel board and capping for a tidy, durable finish.
Typical applications
- Panel fencing: Support for light to medium-duty timber panels in gardens and side returns.
- Picket and decorative fencing: Create attractive boundaries with reliable post spacing.
- Trellis and screening: Fix trellis panels, privacy screens or climber supports.
- Small pedestrian gates: Use as a gate post for lighter gates where a 75mm section is appropriate.
Installation guidance
- Set posts plumb and to line using a level and string line for a straight run.
- Bed in concrete; as a general guide, aim for roughly one-third of the post length below ground (adjust to suit site and load).
- On sloping ground, step posts consistently or maintain a level datum for panels and capping.
- Seal any freshly cut ends, notches or drill holes with an appropriate end-grain preservative.
Fixing and compatibility
The square faces make it simple to fit panel clips, rail brackets, trellis fixings and gate hardware sized for lighter duty. The post works with timber or concrete gravel boards, capping rails and post caps to complete a professional-looking boundary.
Low-maintenance performance
Ongoing care is minimal: periodically check fixings, keep soil or mulch from building up around the base, and clear debris after severe weather. If you wish to refresh the colour later, allow the timber to season before applying a compatible exterior wood finish, and always re-treat any new cuts beforehand.
Benefits at a glance
- Brown pressure-treated timber resists rot, decay and insect damage.
- 75 x 75mm section balances strength with easy handling.
- 1.8m length suits common residential fence heights.
- Square faces simplify alignment and fixing of panels, rails and trellis.
- Natural brown finish coordinates with treated panels, rails and capping.
Summary
The 1.8M x 75 x 75mm Wooden Fence Post - Pressure Treated Brown provides a sturdy, practical foundation for garden fencing, trellis and small gates. Its protective brown treatment, manageable section and straightforward installation make it a reliable choice for neat, durable boundaries in residential settings.
